E11 Class-A Portable Headphone Amplifier
The E11 Class-A Headphone Ampliﬁer. The typical design with a speaker load impedance up to 600 Ω.
- Use On MJE15032 MJE15033 and OPA2604 Op-Amp.
- Use ELNA, Panasonic ECaps,
- Use Simens Film Cap
- 10K Vol. Pot with On/Off Switch
- 3.5mm Audio Jack (In/Out)
- Use Metal Resistors with accuracy of ± 1%
- Good signal-to-noise ratio.
- Work: Class A
- External Supply: DC 12V
- Battery Operation: YES (12 V Rechargable Battary Pack ) (Battery Compartment Size: 55x45x15mm)
- Battery Capacity: 1500mAH
Interface (From R.H.S)
1) 3.5mm Headphone Jack (In / Out) 2) Volume
Remark: This amplifier is sale locally and the iPhone is not included in this amplifier.